蜂窝斜管填料采用什么材质？

 蜂窝斜管填料采用什么材质？

蜂窝斜管填料只要使用使用聚氯乙烯和聚丙烯材质制作而成

根据聚氯乙烯和聚丙烯材质的优缺点来决定的

1、聚乙烯：平面锯齿形　 聚丙烯：螺旋结构，

2、聚乙烯优点：耐低温、耐溶剂性、韧性、介电与电绝缘性好

3、聚丙烯优点：耐沸水、耐蒸汽性、耐溶剂性、介电与电绝缘性好

4、聚乙烯缺点：承载力小、易燃、耐侯性差

5、聚丙烯缺点：韧性、耐寒性、染色性、尺寸稳定性差。

蜂窝斜管是一种主要用于沉淀和除砂装置中的材料。蜂窝斜管在水处理工程中采用较广泛、而且非常成熟的一项水处理装置，如何选择符合自己的蜂窝斜管。

　　 选择蜂窝斜管的方法：

　　　　 （1）先选用蜂窝斜管的材质：蜂窝斜管的材质一般有以下几种：聚丙烯pp材质的、pvc材质的、玻璃钢材质的，但是现在选择聚丙烯pp材质的越来越多，为什么呢？玻璃钢的成本比较高，聚丙烯pp材质的成本比较低，使用的效果也都比较好！

　　　　 （2）选择正确的规格，蜂窝斜管的规格比较多，一般情况下有25、35、50、80的这四种规格，我们在选好材质后，然后选用正确的规格，规格的不同，会导致水流的速度也都不同，效果也都不同，选择合适的规格，也是非常重要的！

　　　　 （3）在选择材质的同时还需要注意一个问题，pp材质的和PVC材质的水温一般不要超过30摄氏度，不然的话容易导致材质软化，降低出水效果。

What material is used for the honeycomb inclined tube filling material?

Honeycomb inclined tube filler as long as the use of polyvinyl chloride and polypropylene made of materials

According to the advantages and disadvantages of PVC and PP materials to determine the

1, polyethylene: planar zigzag polypropylene: spiral structure,

2, polyethylene advantages: low temperature resistance, solvent resistance, toughness, dielectric and electrical insulation is good

3, polypropylene advantages: boiling water resistance, steam resistance, solvent resistance, dielectric and electrical insulation is good

4, polyethylene disadvantages: small loading capacity, flammable, poor weather resistance

5, polypropylene shortcomings: toughness, cold resistance, dyeing, size stability.

Honeycomb inclined tube is a kind of material which is mainly used in precipitation and sand removing device. In the water treatment project, the honeycomb inclined tube is widely used, and it is very mature.

Method for selecting a honeycomb inclined tube:

(1) to use honeycomb inclined tube material: honeycomb inclined tube material generally have the following: polypropylene PP material, PVC material, glass steel, but now select polypropylene PP materials more and more, why? The cost of glass steel is relatively high, the cost of polypropylene PP material is relatively low, the use of the results are also relatively good!

(2) selecting the correct specifications, honeycomb inclined pipe specifications, under normal circumstances there are 25, 35, 50 and 80 of these four kinds of specifications, we in the selected material. Then select the correct specification of, different specifications, lead to flow velocity are different, the effects are also different, choose the appropriate specifications, is also very important!

(3) in the choice of material at the same time also need to pay attention to a problem, the water temperature of PP material and PVC material is generally not more than 30 Celsius degrees, otherwise easily lead to softening of the material, reduce the effluent effect.

河南华信环保科技您身边的水解专家！